1 /* 2 * Copyright (c) 2003, 2026, Oracle and/or its affiliates. All rights reserved. 3 * Copyright (c) 2014, 2020, Red Hat Inc. All rights reserved. 4 * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. 5 * 6 * This code is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License version 2 only, as 8 * published by the Free Software Foundation. 9 * 10 * This code is distributed in the hope that it will be useful, but WITHOUT 11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * version 2 for more details (a copy is included in the LICENSE file that 14 * accompanied this code). 15 * 16 * You should have received a copy of the GNU General Public License version 17 * 2 along with this work; if not, write to the Free Software Foundation, 18 * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 19 * 20 * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA 21 * or visit www.oracle.com if you need additional information or have any 22 * questions. 23 * 24 */ 25 26 #include "asm/macroAssembler.inline.hpp" 27 #include "compiler/compiler_globals.hpp" 28 #include "gc/shared/barrierSet.hpp" 29 #include "gc/shared/barrierSetAssembler.hpp" 30 #include "interp_masm_aarch64.hpp" 31 #include "interpreter/interpreter.hpp" 32 #include "interpreter/interpreterRuntime.hpp" 33 #include "logging/log.hpp" 34 #include "oops/arrayOop.hpp" 35 #include "oops/constMethodFlags.hpp" 36 #include "oops/markWord.hpp" 37 #include "oops/method.hpp" 38 #include "oops/methodData.hpp" 39 #include "oops/inlineKlass.hpp" 40 #include "oops/resolvedFieldEntry.hpp" 41 #include "oops/resolvedIndyEntry.hpp" 42 #include "oops/resolvedMethodEntry.hpp" 43 #include "prims/jvmtiExport.hpp" 44 #include "prims/jvmtiThreadState.hpp" 45 #include "runtime/basicLock.hpp" 46 #include "runtime/frame.inline.hpp" 47 #include "runtime/javaThread.hpp" 48 #include "runtime/safepointMechanism.hpp" 49 #include "runtime/sharedRuntime.hpp" 50 #include "utilities/powerOfTwo.hpp" 51 52 void InterpreterMacroAssembler::narrow(Register result) { 53 54 // Get method->_constMethod->_result_type 55 ldr(rscratch1, Address(rfp, frame::interpreter_frame_method_offset * wordSize)); 56 ldr(rscratch1, Address(rscratch1, Method::const_offset())); 57 ldrb(rscratch1, Address(rscratch1, ConstMethod::result_type_offset())); 58 59 Label done, notBool, notByte, notChar; 60 61 // common case first 62 cmpw(rscratch1, T_INT); 63 br(Assembler::EQ, done); 64 65 // mask integer result to narrower return type. 66 cmpw(rscratch1, T_BOOLEAN); 67 br(Assembler::NE, notBool); 68 andw(result, result, 0x1); 69 b(done); 70 71 bind(notBool); 72 cmpw(rscratch1, T_BYTE); 73 br(Assembler::NE, notByte); 74 sbfx(result, result, 0, 8); 75 b(done); 76 77 bind(notByte); 78 cmpw(rscratch1, T_CHAR); 79 br(Assembler::NE, notChar); 80 ubfx(result, result, 0, 16); // truncate upper 16 bits 81 b(done); 82 83 bind(notChar); 84 sbfx(result, result, 0, 16); // sign-extend short 85 86 // Nothing to do for T_INT 87 bind(done); 88 } 89 90 void InterpreterMacroAssembler::jump_to_entry(address entry) { 91 assert(entry, "Entry must have been generated by now"); 92 b(entry); 93 } 94 95 void InterpreterMacroAssembler::check_and_handle_popframe(Register java_thread) { 96 if (JvmtiExport::can_pop_frame()) { 97 Label L; 98 // Initiate popframe handling only if it is not already being 99 // processed. If the flag has the popframe_processing bit set, it 100 // means that this code is called *during* popframe handling - we 101 // don't want to reenter. 102 // This method is only called just after the call into the vm in 103 // call_VM_base, so the arg registers are available. 104 ldrw(rscratch1, Address(rthread, JavaThread::popframe_condition_offset())); 105 tbz(rscratch1, exact_log2(JavaThread::popframe_pending_bit), L); 106 tbnz(rscratch1, exact_log2(JavaThread::popframe_processing_bit), L); 107 // Call Interpreter::remove_activation_preserving_args_entry() to get the 108 // address of the same-named entrypoint in the generated interpreter code. 109 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_preserving_args_entry)); 110 br(r0); 111 bind(L); 112 } 113 } 114 115 116 void InterpreterMacroAssembler::load_earlyret_value(TosState state) { 117 ldr(r2, Address(rthread, JavaThread::jvmti_thread_state_offset())); 118 const Address tos_addr(r2, JvmtiThreadState::earlyret_tos_offset()); 119 const Address oop_addr(r2, JvmtiThreadState::earlyret_oop_offset()); 120 const Address val_addr(r2, JvmtiThreadState::earlyret_value_offset()); 121 switch (state) { 122 case atos: ldr(r0, oop_addr); 123 str(zr, oop_addr); 124 interp_verify_oop(r0, state); break; 125 case ltos: ldr(r0, val_addr); break; 126 case btos: // fall through 127 case ztos: // fall through 128 case ctos: // fall through 129 case stos: // fall through 130 case itos: ldrw(r0, val_addr); break; 131 case ftos: ldrs(v0, val_addr); break; 132 case dtos: ldrd(v0, val_addr); break; 133 case vtos: /* nothing to do */ break; 134 default : ShouldNotReachHere(); 135 } 136 // Clean up tos value in the thread object 137 movw(rscratch1, (int) ilgl); 138 strw(rscratch1, tos_addr); 139 strw(zr, val_addr); 140 } 141 142 143 void InterpreterMacroAssembler::check_and_handle_earlyret(Register java_thread) { 144 if (JvmtiExport::can_force_early_return()) { 145 Label L; 146 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset())); 147 cbz(rscratch1, L); // if (thread->jvmti_thread_state() == nullptr) exit; 148 149 // Initiate earlyret handling only if it is not already being processed. 150 // If the flag has the earlyret_processing bit set, it means that this code 151 // is called *during* earlyret handling - we don't want to reenter. 152 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_state_offset())); 153 cmpw(rscratch1, JvmtiThreadState::earlyret_pending); 154 br(Assembler::NE, L); 155 156 // Call Interpreter::remove_activation_early_entry() to get the address of the 157 // same-named entrypoint in the generated interpreter code. 158 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset())); 159 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::earlyret_tos_offset())); 160 call_VM_leaf(CAST_FROM_FN_PTR(address, Interpreter::remove_activation_early_entry), rscratch1); 161 br(r0); 162 bind(L); 163 } 164 } 165 166 void InterpreterMacroAssembler::get_unsigned_2_byte_index_at_bcp( 167 Register reg, 168 int bcp_offset) { 169 assert(bcp_offset >= 0, "bcp is still pointing to start of bytecode"); 170 ldrh(reg, Address(rbcp, bcp_offset)); 171 rev16(reg, reg); 172 } 173 174 void InterpreterMacroAssembler::get_dispatch() { 175 uint64_t offset; 176 adrp(rdispatch, ExternalAddress((address)Interpreter::dispatch_table()), offset); 177 // Use add() here after ARDP, rather than lea(). 178 // lea() does not generate anything if its offset is zero. 179 // However, relocs expect to find either an ADD or a load/store 180 // insn after an ADRP. add() always generates an ADD insn, even 181 // for add(Rn, Rn, 0). 182 add(rdispatch, rdispatch, offset); 183 } 184 185 void InterpreterMacroAssembler::get_cache_index_at_bcp(Register index, 186 int bcp_offset, 187 size_t index_size) { 188 assert(bcp_offset > 0, "bcp is still pointing to start of bytecode"); 189 if (index_size == sizeof(u2)) { 190 load_unsigned_short(index, Address(rbcp, bcp_offset)); 191 } else if (index_size == sizeof(u4)) { 192 // assert(EnableInvokeDynamic, "giant index used only for JSR 292"); 193 ldrw(index, Address(rbcp, bcp_offset)); 194 } else if (index_size == sizeof(u1)) { 195 load_unsigned_byte(index, Address(rbcp, bcp_offset)); 196 } else { 197 ShouldNotReachHere(); 198 } 199 } 200 201 void InterpreterMacroAssembler::get_method_counters(Register method, 202 Register mcs, Label& skip) { 203 Label has_counters; 204 ldr(mcs, Address(method, Method::method_counters_offset())); 205 cbnz(mcs, has_counters); 206 call_VM(noreg, CAST_FROM_FN_PTR(address, 207 InterpreterRuntime::build_method_counters), method); 208 ldr(mcs, Address(method, Method::method_counters_offset())); 209 cbz(mcs, skip); // No MethodCounters allocated, OutOfMemory 210 bind(has_counters); 211 } 212 213 void InterpreterMacroAssembler::read_flat_field(Register entry, Register obj) { 214 call_VM(obj, CAST_FROM_FN_PTR(address, InterpreterRuntime::read_flat_field), obj, entry); 215 } 216 217 void InterpreterMacroAssembler::write_flat_field(Register entry, Register field_offset, 218 Register tmp1, Register tmp2, 219 Register obj) { 220 assert_different_registers(entry, field_offset, tmp1, tmp2, obj); 221 Label slow_path, done; 222 223 load_unsigned_byte(tmp1, Address(entry, in_bytes(ResolvedFieldEntry::flags_offset()))); 224 test_field_is_not_null_free_inline_type(tmp1, noreg /* temp */, slow_path); 225 226 null_check(r0); // FIXME JDK-8341120 227 228 add(obj, obj, field_offset); 229 230 load_klass(tmp1, r0, tmp2); 231 payload_address(r0, r0, tmp1); 232 233 Register layout_info = field_offset; 234 load_unsigned_short(tmp1, Address(entry, in_bytes(ResolvedFieldEntry::field_index_offset()))); 235 ldr(tmp2, Address(entry, in_bytes(ResolvedFieldEntry::field_holder_offset()))); 236 inline_layout_info(tmp2, tmp1, layout_info); 237 238 flat_field_copy(IN_HEAP, r0, obj, layout_info); 239 b(done); 240 241 bind(slow_path); 242 call_VM(noreg, CAST_FROM_FN_PTR(address, InterpreterRuntime::write_flat_field), obj, r0, entry); 243 bind(done); 244 } 245 246 // Load object from cpool->resolved_references(index) 247 void InterpreterMacroAssembler::load_resolved_reference_at_index( 248 Register result, Register index, Register tmp) { 249 assert_different_registers(result, index); 250 251 get_constant_pool(result); 252 // load pointer for resolved_references[] objArray 253 ldr(result, Address(result, ConstantPool::cache_offset())); 254 ldr(result, Address(result, ConstantPoolCache::resolved_references_offset())); 255 resolve_oop_handle(result, tmp, rscratch2); 256 // Add in the index 257 add(index, index, arrayOopDesc::base_offset_in_bytes(T_OBJECT) >> LogBytesPerHeapOop); 258 load_heap_oop(result, Address(result, index, Address::uxtw(LogBytesPerHeapOop)), tmp, rscratch2); 259 } 260 261 void InterpreterMacroAssembler::load_resolved_klass_at_offset( 262 Register cpool, Register index, Register klass, Register temp) { 263 add(temp, cpool, index, LSL, LogBytesPerWord); 264 ldrh(temp, Address(temp, sizeof(ConstantPool))); // temp = resolved_klass_index 265 ldr(klass, Address(cpool, ConstantPool::resolved_klasses_offset())); // klass = cpool->_resolved_klasses 266 add(klass, klass, temp, LSL, LogBytesPerWord); 267 ldr(klass, Address(klass, Array<Klass*>::base_offset_in_bytes())); 268 } 269 270 // Generate a subtype check: branch to ok_is_subtype if sub_klass is a 271 // subtype of super_klass. 272 // 273 // Args: 274 // r0: superklass 275 // Rsub_klass: subklass 276 // 277 // Kills: 278 // r2 279 void InterpreterMacroAssembler::gen_subtype_check(Register Rsub_klass, 280 Label& ok_is_subtype, 281 bool profile) { 282 assert(Rsub_klass != r0, "r0 holds superklass"); 283 assert(Rsub_klass != r2, "r2 holds 2ndary super array length"); 284 285 // Profile the not-null value's klass. 286 if (profile) { 287 profile_typecheck(r2, Rsub_klass); // blows r2 288 } 289 // Do the check. 290 check_klass_subtype(Rsub_klass, r0, r2, ok_is_subtype); // blows r2 291 } 292 293 // Java Expression Stack 294 295 void InterpreterMacroAssembler::pop_ptr(Register r) { 296 ldr(r, post(esp, wordSize)); 297 } 298 299 void InterpreterMacroAssembler::pop_i(Register r) { 300 ldrw(r, post(esp, wordSize)); 301 } 302 303 void InterpreterMacroAssembler::pop_l(Register r) { 304 ldr(r, post(esp, 2 * Interpreter::stackElementSize)); 305 } 306 307 void InterpreterMacroAssembler::push_ptr(Register r) { 308 str(r, pre(esp, -wordSize)); 309 } 310 311 void InterpreterMacroAssembler::push_i(Register r) { 312 str(r, pre(esp, -wordSize)); 313 } 314 315 void InterpreterMacroAssembler::push_l(Register r) { 316 str(zr, pre(esp, -wordSize)); 317 str(r, pre(esp, - wordSize)); 318 } 319 320 void InterpreterMacroAssembler::pop_f(FloatRegister r) { 321 ldrs(r, post(esp, wordSize)); 322 } 323 324 void InterpreterMacroAssembler::pop_d(FloatRegister r) { 325 ldrd(r, post(esp, 2 * Interpreter::stackElementSize)); 326 } 327 328 void InterpreterMacroAssembler::push_f(FloatRegister r) { 329 strs(r, pre(esp, -wordSize)); 330 } 331 332 void InterpreterMacroAssembler::push_d(FloatRegister r) { 333 strd(r, pre(esp, 2* -wordSize)); 334 } 335 336 void InterpreterMacroAssembler::pop(TosState state) { 337 switch (state) { 338 case atos: pop_ptr(); break; 339 case btos: 340 case ztos: 341 case ctos: 342 case stos: 343 case itos: pop_i(); break; 344 case ltos: pop_l(); break; 345 case ftos: pop_f(); break; 346 case dtos: pop_d(); break; 347 case vtos: /* nothing to do */ break; 348 default: ShouldNotReachHere(); 349 } 350 interp_verify_oop(r0, state); 351 } 352 353 void InterpreterMacroAssembler::push(TosState state) { 354 interp_verify_oop(r0, state); 355 switch (state) { 356 case atos: push_ptr(); break; 357 case btos: 358 case ztos: 359 case ctos: 360 case stos: 361 case itos: push_i(); break; 362 case ltos: push_l(); break; 363 case ftos: push_f(); break; 364 case dtos: push_d(); break; 365 case vtos: /* nothing to do */ break; 366 default : ShouldNotReachHere(); 367 } 368 } 369 370 // Helpers for swap and dup 371 void InterpreterMacroAssembler::load_ptr(int n, Register val) { 372 ldr(val, Address(esp, Interpreter::expr_offset_in_bytes(n))); 373 } 374 375 void InterpreterMacroAssembler::store_ptr(int n, Register val) { 376 str(val, Address(esp, Interpreter::expr_offset_in_bytes(n))); 377 } 378 379 void InterpreterMacroAssembler::load_float(Address src) { 380 ldrs(v0, src); 381 } 382 383 void InterpreterMacroAssembler::load_double(Address src) { 384 ldrd(v0, src); 385 } 386 387 void InterpreterMacroAssembler::prepare_to_jump_from_interpreted() { 388 // set sender sp 389 mov(r19_sender_sp, sp); 390 // record last_sp 391 sub(rscratch1, esp, rfp); 392 asr(rscratch1, rscratch1, Interpreter::logStackElementSize); 393 str(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); 394 } 395 396 // Jump to from_interpreted entry of a call unless single stepping is possible 397 // in this thread in which case we must call the i2i entry 398 void InterpreterMacroAssembler::jump_from_interpreted(Register method, Register temp) { 399 prepare_to_jump_from_interpreted(); 400 401 if (JvmtiExport::can_post_interpreter_events()) { 402 Label run_compiled_code; 403 // JVMTI events, such as single-stepping, are implemented partly by avoiding running 404 // compiled code in threads for which the event is enabled. Check here for 405 // interp_only_mode if these events CAN be enabled. 406 ldrw(rscratch1, Address(rthread, JavaThread::interp_only_mode_offset())); 407 cbzw(rscratch1, run_compiled_code); 408 ldr(rscratch1, Address(method, Method::interpreter_entry_offset())); 409 br(rscratch1); 410 bind(run_compiled_code); 411 } 412 413 ldr(rscratch1, Address(method, Method::from_interpreted_offset())); 414 br(rscratch1); 415 } 416 417 // The following two routines provide a hook so that an implementation 418 // can schedule the dispatch in two parts. amd64 does not do this. 419 void InterpreterMacroAssembler::dispatch_prolog(TosState state, int step) { 420 } 421 422 void InterpreterMacroAssembler::dispatch_epilog(TosState state, int step) { 423 dispatch_next(state, step); 424 } 425 426 void InterpreterMacroAssembler::dispatch_base(TosState state, 427 address* table, 428 bool verifyoop, 429 bool generate_poll) { 430 if (VerifyActivationFrameSize) { 431 Label L; 432 sub(rscratch2, rfp, esp); 433 int min_frame_size = (frame::link_offset - frame::interpreter_frame_initial_sp_offset) * wordSize; 434 subs(rscratch2, rscratch2, min_frame_size); 435 br(Assembler::GE, L); 436 stop("broken stack frame"); 437 bind(L); 438 } 439 if (verifyoop) { 440 interp_verify_oop(r0, state); 441 } 442 443 Label safepoint; 444 address* const safepoint_table = Interpreter::safept_table(state); 445 bool needs_thread_local_poll = generate_poll && table != safepoint_table; 446 447 if (needs_thread_local_poll) { 448 NOT_PRODUCT(block_comment("Thread-local Safepoint poll")); 449 ldr(rscratch2, Address(rthread, JavaThread::polling_word_offset())); 450 tbnz(rscratch2, exact_log2(SafepointMechanism::poll_bit()), safepoint); 451 } 452 453 if (table == Interpreter::dispatch_table(state)) { 454 addw(rscratch2, rscratch1, Interpreter::distance_from_dispatch_table(state)); 455 ldr(rscratch2, Address(rdispatch, rscratch2, Address::uxtw(3))); 456 } else { 457 mov(rscratch2, (address)table); 458 ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3))); 459 } 460 br(rscratch2); 461 462 if (needs_thread_local_poll) { 463 bind(safepoint); 464 lea(rscratch2, ExternalAddress((address)safepoint_table)); 465 ldr(rscratch2, Address(rscratch2, rscratch1, Address::uxtw(3))); 466 br(rscratch2); 467 } 468 } 469 470 void InterpreterMacroAssembler::dispatch_only(TosState state, bool generate_poll) { 471 dispatch_base(state, Interpreter::dispatch_table(state), true, generate_poll); 472 } 473 474 void InterpreterMacroAssembler::dispatch_only_normal(TosState state) { 475 dispatch_base(state, Interpreter::normal_table(state)); 476 } 477 478 void InterpreterMacroAssembler::dispatch_only_noverify(TosState state) { 479 dispatch_base(state, Interpreter::normal_table(state), false); 480 } 481 482 483 void InterpreterMacroAssembler::dispatch_next(TosState state, int step, bool generate_poll) { 484 // load next bytecode 485 ldrb(rscratch1, Address(pre(rbcp, step))); 486 dispatch_base(state, Interpreter::dispatch_table(state), /*verifyoop*/true, generate_poll); 487 } 488 489 void InterpreterMacroAssembler::dispatch_via(TosState state, address* table) { 490 // load current bytecode 491 ldrb(rscratch1, Address(rbcp, 0)); 492 dispatch_base(state, table); 493 } 494 495 // remove activation 496 // 497 // Unlock the receiver if this is a synchronized method. 498 // Unlock any Java monitors from synchronized blocks. 499 // Apply stack watermark barrier. 500 // Notify JVMTI. 501 // Remove the activation from the stack. 502 // 503 // If there are locked Java monitors 504 // If throw_monitor_exception 505 // throws IllegalMonitorStateException 506 // Else if install_monitor_exception 507 // installs IllegalMonitorStateException 508 // Else 509 // no error processing 510 void InterpreterMacroAssembler::remove_activation(TosState state, 511 bool throw_monitor_exception, 512 bool install_monitor_exception, 513 bool notify_jvmdi) { 514 // Note: Registers r3 xmm0 may be in use for the 515 // result check if synchronized method 516 Label unlocked, unlock, no_unlock; 517 518 #ifdef ASSERT 519 Label not_preempted; 520 ldr(rscratch1, Address(rthread, JavaThread::preempt_alternate_return_offset())); 521 cbz(rscratch1, not_preempted); 522 stop("remove_activation: should not have alternate return address set"); 523 bind(not_preempted); 524 #endif /* ASSERT */ 525 526 // get the value of _do_not_unlock_if_synchronized into r3 527 const Address do_not_unlock_if_synchronized(rthread, 528 in_bytes(JavaThread::do_not_unlock_if_synchronized_offset())); 529 ldrb(r3, do_not_unlock_if_synchronized); 530 strb(zr, do_not_unlock_if_synchronized); // reset the flag 531 532 // get method access flags 533 ldr(r1, Address(rfp, frame::interpreter_frame_method_offset * wordSize)); 534 ldrh(r2, Address(r1, Method::access_flags_offset())); 535 tbz(r2, exact_log2(JVM_ACC_SYNCHRONIZED), unlocked); 536 537 // Don't unlock anything if the _do_not_unlock_if_synchronized flag 538 // is set. 539 cbnz(r3, no_unlock); 540 541 // unlock monitor 542 push(state); // save result 543 544 // BasicObjectLock will be first in list, since this is a 545 // synchronized method. However, need to check that the object has 546 // not been unlocked by an explicit monitorexit bytecode. 547 const Address monitor(rfp, frame::interpreter_frame_initial_sp_offset * 548 wordSize - (int) sizeof(BasicObjectLock)); 549 // We use c_rarg1 so that if we go slow path it will be the correct 550 // register for unlock_object to pass to VM directly 551 lea(c_rarg1, monitor); // address of first monitor 552 553 ldr(r0, Address(c_rarg1, BasicObjectLock::obj_offset())); 554 cbnz(r0, unlock); 555 556 pop(state); 557 if (throw_monitor_exception) { 558 // Entry already unlocked, need to throw exception 559 call_VM(noreg, CAST_FROM_FN_PTR(address, 560 InterpreterRuntime::throw_illegal_monitor_state_exception)); 561 should_not_reach_here(); 562 } else { 563 // Monitor already unlocked during a stack unroll. If requested, 564 // install an illegal_monitor_state_exception. Continue with 565 // stack unrolling. 566 if (install_monitor_exception) { 567 call_VM(noreg, CAST_FROM_FN_PTR(address, 568 InterpreterRuntime::new_illegal_monitor_state_exception)); 569 } 570 b(unlocked); 571 } 572 573 bind(unlock); 574 unlock_object(c_rarg1); 575 pop(state); 576 577 // Check that for block-structured locking (i.e., that all locked 578 // objects has been unlocked) 579 bind(unlocked); 580 581 // r0: Might contain return value 582 583 // Check that all monitors are unlocked 584 { 585 Label loop, exception, entry, restart; 586 const int entry_size = frame::interpreter_frame_monitor_size_in_bytes(); 587 const Address monitor_block_top( 588 rfp, frame::interpreter_frame_monitor_block_top_offset * wordSize); 589 const Address monitor_block_bot( 590 rfp, frame::interpreter_frame_initial_sp_offset * wordSize); 591 592 bind(restart); 593 // We use c_rarg1 so that if we go slow path it will be the correct 594 // register for unlock_object to pass to VM directly 595 ldr(c_rarg1, monitor_block_top); // derelativize pointer 596 lea(c_rarg1, Address(rfp, c_rarg1, Address::lsl(Interpreter::logStackElementSize))); 597 // c_rarg1 points to current entry, starting with top-most entry 598 599 lea(r19, monitor_block_bot); // points to word before bottom of 600 // monitor block 601 b(entry); 602 603 // Entry already locked, need to throw exception 604 bind(exception); 605 606 if (throw_monitor_exception) { 607 // Throw exception 608 MacroAssembler::call_VM(noreg, 609 CAST_FROM_FN_PTR(address, InterpreterRuntime:: 610 throw_illegal_monitor_state_exception)); 611 should_not_reach_here(); 612 } else { 613 // Stack unrolling. Unlock object and install illegal_monitor_exception. 614 // Unlock does not block, so don't have to worry about the frame. 615 // We don't have to preserve c_rarg1 since we are going to throw an exception. 616 617 push(state); 618 unlock_object(c_rarg1); 619 pop(state); 620 621 if (install_monitor_exception) { 622 call_VM(noreg, CAST_FROM_FN_PTR(address, 623 InterpreterRuntime:: 624 new_illegal_monitor_state_exception)); 625 } 626 627 b(restart); 628 } 629 630 bind(loop); 631 // check if current entry is used 632 ldr(rscratch1, Address(c_rarg1, BasicObjectLock::obj_offset())); 633 cbnz(rscratch1, exception); 634 635 add(c_rarg1, c_rarg1, entry_size); // otherwise advance to next entry 636 bind(entry); 637 cmp(c_rarg1, r19); // check if bottom reached 638 br(Assembler::NE, loop); // if not at bottom then check this entry 639 } 640 641 bind(no_unlock); 642 643 JFR_ONLY(enter_jfr_critical_section();) 644 645 // The below poll is for the stack watermark barrier. It allows fixing up frames lazily, 646 // that would normally not be safe to use. Such bad returns into unsafe territory of 647 // the stack, will call InterpreterRuntime::at_unwind. 648 Label slow_path; 649 Label fast_path; 650 safepoint_poll(slow_path, true /* at_return */, false /* in_nmethod */); 651 br(Assembler::AL, fast_path); 652 bind(slow_path); 653 push(state); 654 set_last_Java_frame(esp, rfp, pc(), rscratch1); 655 super_call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::at_unwind), rthread); 656 reset_last_Java_frame(true); 657 pop(state); 658 bind(fast_path); 659 660 // JVMTI support. Make sure the safepoint poll test is issued prior. 661 if (notify_jvmdi) { 662 notify_method_exit(state, NotifyJVMTI); // preserve TOSCA 663 } else { 664 notify_method_exit(state, SkipNotifyJVMTI); // preserve TOSCA 665 } 666 667 // remove activation 668 // get sender esp 669 ldr(rscratch2, 670 Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize)); 671 if (StackReservedPages > 0) { 672 // testing if reserved zone needs to be re-enabled 673 Label no_reserved_zone_enabling; 674 675 // check if already enabled - if so no re-enabling needed 676 assert(sizeof(StackOverflow::StackGuardState) == 4, "unexpected size"); 677 ldrw(rscratch1, Address(rthread, JavaThread::stack_guard_state_offset())); 678 cmpw(rscratch1, (u1)StackOverflow::stack_guard_enabled); 679 br(Assembler::EQ, no_reserved_zone_enabling); 680 681 // look for an overflow into the stack reserved zone, i.e. 682 // interpreter_frame_sender_sp <= JavaThread::reserved_stack_activation 683 ldr(rscratch1, Address(rthread, JavaThread::reserved_stack_activation_offset())); 684 cmp(rscratch2, rscratch1); 685 br(Assembler::LS, no_reserved_zone_enabling); 686 687 JFR_ONLY(leave_jfr_critical_section();) 688 689 call_VM_leaf( 690 CAST_FROM_FN_PTR(address, SharedRuntime::enable_stack_reserved_zone), rthread); 691 call_VM(noreg, CAST_FROM_FN_PTR(address, 692 InterpreterRuntime::throw_delayed_StackOverflowError)); 693 should_not_reach_here(); 694 695 bind(no_reserved_zone_enabling); 696 } 697 698 if (state == atos && InlineTypeReturnedAsFields) { 699 Label skip; 700 Label not_null; 701 cbnz(r0, not_null); 702 // Returned value is null, zero all return registers because they may belong to oop fields 703 mov(j_rarg1, zr); 704 mov(j_rarg2, zr); 705 mov(j_rarg3, zr); 706 mov(j_rarg4, zr); 707 mov(j_rarg5, zr); 708 mov(j_rarg6, zr); 709 mov(j_rarg7, zr); 710 b(skip); 711 bind(not_null); 712 713 // Check if we are returning a non-null inline type and load its fields into registers 714 test_oop_is_not_inline_type(r0, rscratch2, skip, /* can_be_null= */ false); 715 716 // Load fields from a buffered value with an inline class specific handler 717 load_klass(rscratch1 /*dst*/, r0 /*src*/, rscratch2 /*tmp*/); 718 ldr(rscratch1, Address(rscratch1, InlineKlass::adr_members_offset())); 719 ldr(rscratch1, Address(rscratch1, InlineKlass::unpack_handler_offset())); 720 // Unpack handler can be null if inline type is not scalarizable in returns 721 cbz(rscratch1, skip); 722 723 blr(rscratch1); 724 bind(skip); 725 // Check above kills sender esp in rscratch2. Reload it. 726 ldr(rscratch2, Address(rfp, frame::interpreter_frame_sender_sp_offset * wordSize)); 727 } 728 729 // remove frame anchor 730 leave(); 731 732 JFR_ONLY(leave_jfr_critical_section();) 733 734 // restore sender esp 735 mov(esp, rscratch2); 736 737 // If we're returning to interpreted code we will shortly be 738 // adjusting SP to allow some space for ESP. If we're returning to 739 // compiled code the saved sender SP was saved in sender_sp, so this 740 // restores it. 741 andr(sp, esp, -16); 742 } 743 744 #if INCLUDE_JFR 745 void InterpreterMacroAssembler::enter_jfr_critical_section() { 746 const Address sampling_critical_section(rthread, in_bytes(SAMPLING_CRITICAL_SECTION_OFFSET_JFR)); 747 mov(rscratch1, true); 748 strb(rscratch1, sampling_critical_section); 749 } 750 751 void InterpreterMacroAssembler::leave_jfr_critical_section() { 752 const Address sampling_critical_section(rthread, in_bytes(SAMPLING_CRITICAL_SECTION_OFFSET_JFR)); 753 strb(zr, sampling_critical_section); 754 } 755 #endif // INCLUDE_JFR 756 757 // Lock object 758 // 759 // Args: 760 // c_rarg1: BasicObjectLock to be used for locking 761 // 762 // Kills: 763 // r0 764 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, c_rarg4, .. (param regs) 765 // rscratch1, rscratch2 (scratch regs) 766 void InterpreterMacroAssembler::lock_object(Register lock_reg) 767 { 768 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be c_rarg1"); 769 770 const Register tmp = c_rarg2; 771 const Register obj_reg = c_rarg3; // Will contain the oop 772 const Register tmp2 = c_rarg4; 773 const Register tmp3 = c_rarg5; 774 775 // Load object pointer into obj_reg %c_rarg3 776 ldr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset())); 777 778 Label slow_case, done; 779 fast_lock(lock_reg, obj_reg, tmp, tmp2, tmp3, slow_case); 780 b(done); 781 782 bind(slow_case); 783 784 // Call the runtime routine for slow case 785 call_VM_preemptable(noreg, 786 CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorenter), 787 lock_reg); 788 789 bind(done); 790 } 791 792 793 // Unlocks an object. Used in monitorexit bytecode and 794 // remove_activation. Throws an IllegalMonitorException if object is 795 // not locked by current thread. 796 // 797 // Args: 798 // c_rarg1: BasicObjectLock for lock 799 // 800 // Kills: 801 // r0 802 // c_rarg0, c_rarg1, c_rarg2, c_rarg3, ... (param regs) 803 // rscratch1, rscratch2 (scratch regs) 804 void InterpreterMacroAssembler::unlock_object(Register lock_reg) 805 { 806 assert(lock_reg == c_rarg1, "The argument is only for looks. It must be rarg1"); 807 808 const Register swap_reg = r0; 809 const Register header_reg = c_rarg2; // Will contain the old oopMark 810 const Register obj_reg = c_rarg3; // Will contain the oop 811 const Register tmp_reg = c_rarg4; // Temporary used by fast_unlock 812 813 save_bcp(); // Save in case of exception 814 815 // Load oop into obj_reg(%c_rarg3) 816 ldr(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset())); 817 818 // Free entry 819 str(zr, Address(lock_reg, BasicObjectLock::obj_offset())); 820 821 Label slow_case, done; 822 fast_unlock(obj_reg, header_reg, swap_reg, tmp_reg, slow_case); 823 b(done); 824 825 bind(slow_case); 826 // Call the runtime routine for slow case. 827 str(obj_reg, Address(lock_reg, BasicObjectLock::obj_offset())); // restore obj 828 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::monitorexit), lock_reg); 829 bind(done); 830 restore_bcp(); 831 } 832 833 void InterpreterMacroAssembler::test_method_data_pointer(Register mdp, 834 Label& zero_continue) { 835 assert(ProfileInterpreter, "must be profiling interpreter"); 836 ldr(mdp, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize)); 837 cbz(mdp, zero_continue); 838 } 839 840 // Set the method data pointer for the current bcp. 841 void InterpreterMacroAssembler::set_method_data_pointer_for_bcp() { 842 assert(ProfileInterpreter, "must be profiling interpreter"); 843 Label set_mdp; 844 stp(r0, r1, Address(pre(sp, -2 * wordSize))); 845 846 // Test MDO to avoid the call if it is null. 847 ldr(r0, Address(rmethod, in_bytes(Method::method_data_offset()))); 848 cbz(r0, set_mdp); 849 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::bcp_to_di), rmethod, rbcp); 850 // r0: mdi 851 // mdo is guaranteed to be non-zero here, we checked for it before the call. 852 ldr(r1, Address(rmethod, in_bytes(Method::method_data_offset()))); 853 lea(r1, Address(r1, in_bytes(MethodData::data_offset()))); 854 add(r0, r1, r0); 855 str(r0, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize)); 856 bind(set_mdp); 857 ldp(r0, r1, Address(post(sp, 2 * wordSize))); 858 } 859 860 void InterpreterMacroAssembler::verify_method_data_pointer() { 861 assert(ProfileInterpreter, "must be profiling interpreter"); 862 #ifdef ASSERT 863 Label verify_continue; 864 stp(r0, r1, Address(pre(sp, -2 * wordSize))); 865 stp(r2, r3, Address(pre(sp, -2 * wordSize))); 866 test_method_data_pointer(r3, verify_continue); // If mdp is zero, continue 867 get_method(r1); 868 869 // If the mdp is valid, it will point to a DataLayout header which is 870 // consistent with the bcp. The converse is highly probable also. 871 ldrsh(r2, Address(r3, in_bytes(DataLayout::bci_offset()))); 872 ldr(rscratch1, Address(r1, Method::const_offset())); 873 add(r2, r2, rscratch1, Assembler::LSL); 874 lea(r2, Address(r2, ConstMethod::codes_offset())); 875 cmp(r2, rbcp); 876 br(Assembler::EQ, verify_continue); 877 // r1: method 878 // rbcp: bcp // rbcp == 22 879 // r3: mdp 880 call_VM_leaf(CAST_FROM_FN_PTR(address, InterpreterRuntime::verify_mdp), 881 r1, rbcp, r3); 882 bind(verify_continue); 883 ldp(r2, r3, Address(post(sp, 2 * wordSize))); 884 ldp(r0, r1, Address(post(sp, 2 * wordSize))); 885 #endif // ASSERT 886 } 887 888 889 void InterpreterMacroAssembler::set_mdp_data_at(Register mdp_in, 890 int constant, 891 Register value) { 892 assert(ProfileInterpreter, "must be profiling interpreter"); 893 Address data(mdp_in, constant); 894 str(value, data); 895 } 896 897 898 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 899 int constant) { 900 increment_mdp_data_at(mdp_in, noreg, constant); 901 } 902 903 void InterpreterMacroAssembler::increment_mdp_data_at(Register mdp_in, 904 Register index, 905 int constant) { 906 assert(ProfileInterpreter, "must be profiling interpreter"); 907 908 assert_different_registers(rscratch2, rscratch1, mdp_in, index); 909 910 Address addr1(mdp_in, constant); 911 Address addr2(rscratch2, index, Address::lsl(0)); 912 Address &addr = addr1; 913 if (index != noreg) { 914 lea(rscratch2, addr1); 915 addr = addr2; 916 } 917 918 increment(addr, DataLayout::counter_increment); 919 } 920 921 void InterpreterMacroAssembler::set_mdp_flag_at(Register mdp_in, 922 int flag_byte_constant) { 923 assert(ProfileInterpreter, "must be profiling interpreter"); 924 int flags_offset = in_bytes(DataLayout::flags_offset()); 925 // Set the flag 926 ldrb(rscratch1, Address(mdp_in, flags_offset)); 927 orr(rscratch1, rscratch1, flag_byte_constant); 928 strb(rscratch1, Address(mdp_in, flags_offset)); 929 } 930 931 932 void InterpreterMacroAssembler::test_mdp_data_at(Register mdp_in, 933 int offset, 934 Register value, 935 Register test_value_out, 936 Label& not_equal_continue) { 937 assert(ProfileInterpreter, "must be profiling interpreter"); 938 if (test_value_out == noreg) { 939 ldr(rscratch1, Address(mdp_in, offset)); 940 cmp(value, rscratch1); 941 } else { 942 // Put the test value into a register, so caller can use it: 943 ldr(test_value_out, Address(mdp_in, offset)); 944 cmp(value, test_value_out); 945 } 946 br(Assembler::NE, not_equal_continue); 947 } 948 949 950 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 951 int offset_of_disp) { 952 assert(ProfileInterpreter, "must be profiling interpreter"); 953 ldr(rscratch1, Address(mdp_in, offset_of_disp)); 954 add(mdp_in, mdp_in, rscratch1, LSL); 955 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize)); 956 } 957 958 959 void InterpreterMacroAssembler::update_mdp_by_offset(Register mdp_in, 960 Register reg, 961 int offset_of_disp) { 962 assert(ProfileInterpreter, "must be profiling interpreter"); 963 lea(rscratch1, Address(mdp_in, offset_of_disp)); 964 ldr(rscratch1, Address(rscratch1, reg, Address::lsl(0))); 965 add(mdp_in, mdp_in, rscratch1, LSL); 966 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize)); 967 } 968 969 970 void InterpreterMacroAssembler::update_mdp_by_constant(Register mdp_in, 971 int constant) { 972 assert(ProfileInterpreter, "must be profiling interpreter"); 973 add(mdp_in, mdp_in, (unsigned)constant); 974 str(mdp_in, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize)); 975 } 976 977 978 void InterpreterMacroAssembler::update_mdp_for_ret(Register return_bci) { 979 assert(ProfileInterpreter, "must be profiling interpreter"); 980 // save/restore across call_VM 981 stp(zr, return_bci, Address(pre(sp, -2 * wordSize))); 982 call_VM(noreg, 983 CAST_FROM_FN_PTR(address, InterpreterRuntime::update_mdp_for_ret), 984 return_bci); 985 ldp(zr, return_bci, Address(post(sp, 2 * wordSize))); 986 } 987 988 989 void InterpreterMacroAssembler::profile_taken_branch(Register mdp) { 990 if (ProfileInterpreter) { 991 Label profile_continue; 992 993 // If no method data exists, go to profile_continue. 994 test_method_data_pointer(mdp, profile_continue); 995 996 // We are taking a branch. Increment the taken count. 997 increment_mdp_data_at(mdp, in_bytes(JumpData::taken_offset())); 998 999 // The method data pointer needs to be updated to reflect the new target. 1000 update_mdp_by_offset(mdp, in_bytes(JumpData::displacement_offset())); 1001 bind(profile_continue); 1002 } 1003 } 1004 1005 1006 void InterpreterMacroAssembler::profile_not_taken_branch(Register mdp, bool acmp) { 1007 if (ProfileInterpreter) { 1008 Label profile_continue; 1009 1010 // If no method data exists, go to profile_continue. 1011 test_method_data_pointer(mdp, profile_continue); 1012 1013 // We are not taking a branch. Increment the not taken count. 1014 increment_mdp_data_at(mdp, in_bytes(BranchData::not_taken_offset())); 1015 1016 // The method data pointer needs to be updated to correspond to 1017 // the next bytecode 1018 update_mdp_by_constant(mdp, acmp ? in_bytes(ACmpData::acmp_data_size()) : in_bytes(BranchData::branch_data_size())); 1019 bind(profile_continue); 1020 } 1021 } 1022 1023 1024 void InterpreterMacroAssembler::profile_call(Register mdp) { 1025 if (ProfileInterpreter) { 1026 Label profile_continue; 1027 1028 // If no method data exists, go to profile_continue. 1029 test_method_data_pointer(mdp, profile_continue); 1030 1031 // We are making a call. Increment the count. 1032 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1033 1034 // The method data pointer needs to be updated to reflect the new target. 1035 update_mdp_by_constant(mdp, in_bytes(CounterData::counter_data_size())); 1036 bind(profile_continue); 1037 } 1038 } 1039 1040 void InterpreterMacroAssembler::profile_final_call(Register mdp) { 1041 if (ProfileInterpreter) { 1042 Label profile_continue; 1043 1044 // If no method data exists, go to profile_continue. 1045 test_method_data_pointer(mdp, profile_continue); 1046 1047 // We are making a call. Increment the count. 1048 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1049 1050 // The method data pointer needs to be updated to reflect the new target. 1051 update_mdp_by_constant(mdp, 1052 in_bytes(VirtualCallData:: 1053 virtual_call_data_size())); 1054 bind(profile_continue); 1055 } 1056 } 1057 1058 1059 void InterpreterMacroAssembler::profile_virtual_call(Register receiver, 1060 Register mdp) { 1061 if (ProfileInterpreter) { 1062 Label profile_continue; 1063 1064 // If no method data exists, go to profile_continue. 1065 test_method_data_pointer(mdp, profile_continue); 1066 1067 // Record the receiver type. 1068 profile_receiver_type(receiver, mdp, 0); 1069 1070 // The method data pointer needs to be updated to reflect the new target. 1071 update_mdp_by_constant(mdp, in_bytes(VirtualCallData::virtual_call_data_size())); 1072 bind(profile_continue); 1073 } 1074 } 1075 1076 void InterpreterMacroAssembler::profile_ret(Register return_bci, 1077 Register mdp) { 1078 if (ProfileInterpreter) { 1079 Label profile_continue; 1080 uint row; 1081 1082 // If no method data exists, go to profile_continue. 1083 test_method_data_pointer(mdp, profile_continue); 1084 1085 // Update the total ret count. 1086 increment_mdp_data_at(mdp, in_bytes(CounterData::count_offset())); 1087 1088 for (row = 0; row < RetData::row_limit(); row++) { 1089 Label next_test; 1090 1091 // See if return_bci is equal to bci[n]: 1092 test_mdp_data_at(mdp, 1093 in_bytes(RetData::bci_offset(row)), 1094 return_bci, noreg, 1095 next_test); 1096 1097 // return_bci is equal to bci[n]. Increment the count. 1098 increment_mdp_data_at(mdp, in_bytes(RetData::bci_count_offset(row))); 1099 1100 // The method data pointer needs to be updated to reflect the new target. 1101 update_mdp_by_offset(mdp, 1102 in_bytes(RetData::bci_displacement_offset(row))); 1103 b(profile_continue); 1104 bind(next_test); 1105 } 1106 1107 update_mdp_for_ret(return_bci); 1108 1109 bind(profile_continue); 1110 } 1111 } 1112 1113 void InterpreterMacroAssembler::profile_null_seen(Register mdp) { 1114 if (ProfileInterpreter) { 1115 Label profile_continue; 1116 1117 // If no method data exists, go to profile_continue. 1118 test_method_data_pointer(mdp, profile_continue); 1119 1120 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); 1121 1122 // The method data pointer needs to be updated. 1123 int mdp_delta = in_bytes(BitData::bit_data_size()); 1124 if (TypeProfileCasts) { 1125 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1126 } 1127 update_mdp_by_constant(mdp, mdp_delta); 1128 1129 bind(profile_continue); 1130 } 1131 } 1132 1133 void InterpreterMacroAssembler::profile_typecheck(Register mdp, Register klass) { 1134 if (ProfileInterpreter) { 1135 Label profile_continue; 1136 1137 // If no method data exists, go to profile_continue. 1138 test_method_data_pointer(mdp, profile_continue); 1139 1140 // The method data pointer needs to be updated. 1141 int mdp_delta = in_bytes(BitData::bit_data_size()); 1142 if (TypeProfileCasts) { 1143 mdp_delta = in_bytes(VirtualCallData::virtual_call_data_size()); 1144 1145 // Record the object type. 1146 profile_receiver_type(klass, mdp, 0); 1147 } 1148 update_mdp_by_constant(mdp, mdp_delta); 1149 1150 bind(profile_continue); 1151 } 1152 } 1153 1154 void InterpreterMacroAssembler::profile_switch_default(Register mdp) { 1155 if (ProfileInterpreter) { 1156 Label profile_continue; 1157 1158 // If no method data exists, go to profile_continue. 1159 test_method_data_pointer(mdp, profile_continue); 1160 1161 // Update the default case count 1162 increment_mdp_data_at(mdp, 1163 in_bytes(MultiBranchData::default_count_offset())); 1164 1165 // The method data pointer needs to be updated. 1166 update_mdp_by_offset(mdp, 1167 in_bytes(MultiBranchData:: 1168 default_displacement_offset())); 1169 1170 bind(profile_continue); 1171 } 1172 } 1173 1174 void InterpreterMacroAssembler::profile_switch_case(Register index, 1175 Register mdp, 1176 Register reg2) { 1177 if (ProfileInterpreter) { 1178 Label profile_continue; 1179 1180 // If no method data exists, go to profile_continue. 1181 test_method_data_pointer(mdp, profile_continue); 1182 1183 // Build the base (index * per_case_size_in_bytes()) + 1184 // case_array_offset_in_bytes() 1185 movw(reg2, in_bytes(MultiBranchData::per_case_size())); 1186 movw(rscratch1, in_bytes(MultiBranchData::case_array_offset())); 1187 Assembler::maddw(index, index, reg2, rscratch1); 1188 1189 // Update the case count 1190 increment_mdp_data_at(mdp, 1191 index, 1192 in_bytes(MultiBranchData::relative_count_offset())); 1193 1194 // The method data pointer needs to be updated. 1195 update_mdp_by_offset(mdp, 1196 index, 1197 in_bytes(MultiBranchData:: 1198 relative_displacement_offset())); 1199 1200 bind(profile_continue); 1201 } 1202 } 1203 1204 template <class ArrayData> void InterpreterMacroAssembler::profile_array_type(Register mdp, 1205 Register array, 1206 Register tmp) { 1207 if (ProfileInterpreter) { 1208 Label profile_continue; 1209 1210 // If no method data exists, go to profile_continue. 1211 test_method_data_pointer(mdp, profile_continue); 1212 1213 mov(tmp, array); 1214 profile_obj_type(tmp, Address(mdp, in_bytes(ArrayData::array_offset()))); 1215 1216 Label not_flat; 1217 test_non_flat_array_oop(array, tmp, not_flat); 1218 1219 set_mdp_flag_at(mdp, ArrayData::flat_array_byte_constant()); 1220 1221 bind(not_flat); 1222 1223 Label not_null_free; 1224 test_non_null_free_array_oop(array, tmp, not_null_free); 1225 1226 set_mdp_flag_at(mdp, ArrayData::null_free_array_byte_constant()); 1227 1228 bind(not_null_free); 1229 1230 bind(profile_continue); 1231 } 1232 } 1233 1234 template void InterpreterMacroAssembler::profile_array_type<ArrayLoadData>(Register mdp, 1235 Register array, 1236 Register tmp); 1237 template void InterpreterMacroAssembler::profile_array_type<ArrayStoreData>(Register mdp, 1238 Register array, 1239 Register tmp); 1240 1241 void InterpreterMacroAssembler::profile_multiple_element_types(Register mdp, Register element, Register tmp, const Register tmp2) { 1242 if (ProfileInterpreter) { 1243 Label profile_continue; 1244 1245 // If no method data exists, go to profile_continue. 1246 test_method_data_pointer(mdp, profile_continue); 1247 1248 Label done, update; 1249 cbnz(element, update); 1250 set_mdp_flag_at(mdp, BitData::null_seen_byte_constant()); 1251 b(done); 1252 1253 bind(update); 1254 load_klass(tmp, element, tmp2); 1255 1256 // Record the object type. 1257 profile_receiver_type(tmp, mdp, 0); 1258 1259 bind(done); 1260 1261 // The method data pointer needs to be updated. 1262 update_mdp_by_constant(mdp, in_bytes(ArrayStoreData::array_store_data_size())); 1263 1264 bind(profile_continue); 1265 } 1266 } 1267 1268 1269 void InterpreterMacroAssembler::profile_element_type(Register mdp, 1270 Register element, 1271 Register tmp) { 1272 if (ProfileInterpreter) { 1273 Label profile_continue; 1274 1275 // If no method data exists, go to profile_continue. 1276 test_method_data_pointer(mdp, profile_continue); 1277 1278 mov(tmp, element); 1279 profile_obj_type(tmp, Address(mdp, in_bytes(ArrayLoadData::element_offset()))); 1280 1281 // The method data pointer needs to be updated. 1282 update_mdp_by_constant(mdp, in_bytes(ArrayLoadData::array_load_data_size())); 1283 1284 bind(profile_continue); 1285 } 1286 } 1287 1288 void InterpreterMacroAssembler::profile_acmp(Register mdp, 1289 Register left, 1290 Register right, 1291 Register tmp) { 1292 if (ProfileInterpreter) { 1293 Label profile_continue; 1294 1295 // If no method data exists, go to profile_continue. 1296 test_method_data_pointer(mdp, profile_continue); 1297 1298 mov(tmp, left); 1299 profile_obj_type(tmp, Address(mdp, in_bytes(ACmpData::left_offset()))); 1300 1301 Label left_not_inline_type; 1302 test_oop_is_not_inline_type(left, tmp, left_not_inline_type); 1303 set_mdp_flag_at(mdp, ACmpData::left_inline_type_byte_constant()); 1304 bind(left_not_inline_type); 1305 1306 mov(tmp, right); 1307 profile_obj_type(tmp, Address(mdp, in_bytes(ACmpData::right_offset()))); 1308 1309 Label right_not_inline_type; 1310 test_oop_is_not_inline_type(right, tmp, right_not_inline_type); 1311 set_mdp_flag_at(mdp, ACmpData::right_inline_type_byte_constant()); 1312 bind(right_not_inline_type); 1313 1314 bind(profile_continue); 1315 } 1316 } 1317 1318 void InterpreterMacroAssembler::_interp_verify_oop(Register reg, TosState state, const char* file, int line) { 1319 if (state == atos) { 1320 MacroAssembler::_verify_oop_checked(reg, "broken oop", file, line); 1321 } 1322 } 1323 1324 void InterpreterMacroAssembler::notify_method_entry() { 1325 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 1326 // track stack depth. If it is possible to enter interp_only_mode we add 1327 // the code to check if the event should be sent. 1328 if (JvmtiExport::can_post_interpreter_events()) { 1329 Label L; 1330 ldrw(r3, Address(rthread, JavaThread::interp_only_mode_offset())); 1331 cbzw(r3, L); 1332 call_VM(noreg, CAST_FROM_FN_PTR(address, 1333 InterpreterRuntime::post_method_entry)); 1334 bind(L); 1335 } 1336 1337 if (DTraceMethodProbes) { 1338 get_method(c_rarg1); 1339 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_entry), 1340 rthread, c_rarg1); 1341 } 1342 1343 // RedefineClasses() tracing support for obsolete method entry 1344 if (log_is_enabled(Trace, redefine, class, obsolete)) { 1345 get_method(c_rarg1); 1346 call_VM_leaf( 1347 CAST_FROM_FN_PTR(address, SharedRuntime::rc_trace_method_entry), 1348 rthread, c_rarg1); 1349 } 1350 1351 } 1352 1353 1354 void InterpreterMacroAssembler::notify_method_exit( 1355 TosState state, NotifyMethodExitMode mode) { 1356 // Whenever JVMTI is interp_only_mode, method entry/exit events are sent to 1357 // track stack depth. If it is possible to enter interp_only_mode we add 1358 // the code to check if the event should be sent. 1359 if (mode == NotifyJVMTI && (JvmtiExport::can_post_interpreter_events() || JvmtiExport::can_post_frame_pop())) { 1360 Label L; 1361 // Note: frame::interpreter_frame_result has a dependency on how the 1362 // method result is saved across the call to post_method_exit. If this 1363 // is changed then the interpreter_frame_result implementation will 1364 // need to be updated too. 1365 1366 // template interpreter will leave the result on the top of the stack. 1367 push(state); 1368 1369 ldr(rscratch1, Address(rthread, JavaThread::jvmti_thread_state_offset())); 1370 cbz(rscratch1, L); // if (thread->jvmti_thread_state() == nullptr) exit; 1371 1372 ldrw(rscratch1, Address(rscratch1, JvmtiThreadState::frame_pop_cnt_offset())); 1373 ldrw(rscratch2, Address(rthread, JavaThread::interp_only_mode_offset())); 1374 orrw(rscratch1, rscratch1, rscratch2); 1375 cbzw(rscratch1, L); 1376 1377 call_VM(noreg, 1378 CAST_FROM_FN_PTR(address, InterpreterRuntime::post_method_exit)); 1379 bind(L); 1380 pop(state); 1381 } 1382 1383 if (DTraceMethodProbes) { 1384 push(state); 1385 get_method(c_rarg1); 1386 call_VM_leaf(CAST_FROM_FN_PTR(address, SharedRuntime::dtrace_method_exit), 1387 rthread, c_rarg1); 1388 pop(state); 1389 } 1390 } 1391 1392 1393 // Jump if ((*counter_addr += increment) & mask) satisfies the condition. 1394 void InterpreterMacroAssembler::increment_mask_and_jump(Address counter_addr, 1395 int increment, Address mask, 1396 Register scratch, Register scratch2, 1397 bool preloaded, Condition cond, 1398 Label* where) { 1399 if (!preloaded) { 1400 ldrw(scratch, counter_addr); 1401 } 1402 add(scratch, scratch, increment); 1403 strw(scratch, counter_addr); 1404 ldrw(scratch2, mask); 1405 ands(scratch, scratch, scratch2); 1406 br(cond, *where); 1407 } 1408 1409 void InterpreterMacroAssembler::call_VM_leaf_base(address entry_point, 1410 int number_of_arguments) { 1411 // interpreter specific 1412 // 1413 // Note: No need to save/restore rbcp & rlocals pointer since these 1414 // are callee saved registers and no blocking/ GC can happen 1415 // in leaf calls. 1416 #ifdef ASSERT 1417 { 1418 Label L; 1419 ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); 1420 cbz(rscratch1, L); 1421 stop("InterpreterMacroAssembler::call_VM_leaf_base:" 1422 " last_sp != nullptr"); 1423 bind(L); 1424 } 1425 #endif /* ASSERT */ 1426 // super call 1427 MacroAssembler::call_VM_leaf_base(entry_point, number_of_arguments); 1428 } 1429 1430 void InterpreterMacroAssembler::call_VM_base(Register oop_result, 1431 Register java_thread, 1432 Register last_java_sp, 1433 Label* return_pc, 1434 address entry_point, 1435 int number_of_arguments, 1436 bool check_exceptions) { 1437 // interpreter specific 1438 // 1439 // Note: Could avoid restoring locals ptr (callee saved) - however doesn't 1440 // really make a difference for these runtime calls, since they are 1441 // slow anyway. Btw., bcp must be saved/restored since it may change 1442 // due to GC. 1443 // assert(java_thread == noreg , "not expecting a precomputed java thread"); 1444 save_bcp(); 1445 #ifdef ASSERT 1446 { 1447 Label L; 1448 ldr(rscratch1, Address(rfp, frame::interpreter_frame_last_sp_offset * wordSize)); 1449 cbz(rscratch1, L); 1450 stop("InterpreterMacroAssembler::call_VM_base:" 1451 " last_sp != nullptr"); 1452 bind(L); 1453 } 1454 #endif /* ASSERT */ 1455 // super call 1456 MacroAssembler::call_VM_base(oop_result, noreg, last_java_sp, 1457 return_pc, entry_point, 1458 number_of_arguments, check_exceptions); 1459 // interpreter specific 1460 restore_bcp(); 1461 restore_locals(); 1462 } 1463 1464 void InterpreterMacroAssembler::call_VM_preemptable_helper(Register oop_result, 1465 address entry_point, 1466 int number_of_arguments, 1467 bool check_exceptions) { 1468 assert(InterpreterRuntime::is_preemptable_call(entry_point), "VM call not preemptable, should use call_VM()"); 1469 Label resume_pc, not_preempted; 1470 1471 #ifdef ASSERT 1472 { 1473 Label L1, L2; 1474 ldr(rscratch1, Address(rthread, JavaThread::preempt_alternate_return_offset())); 1475 cbz(rscratch1, L1); 1476 stop("call_VM_preemptable_helper: Should not have alternate return address set"); 1477 bind(L1); 1478 // We check this counter in patch_return_pc_with_preempt_stub() during freeze. 1479 incrementw(Address(rthread, JavaThread::interp_at_preemptable_vmcall_cnt_offset())); 1480 ldrw(rscratch1, Address(rthread, JavaThread::interp_at_preemptable_vmcall_cnt_offset())); 1481 cmpw(rscratch1, 0); 1482 br(Assembler::GT, L2); 1483 stop("call_VM_preemptable_helper: should be > 0"); 1484 bind(L2); 1485 } 1486 #endif /* ASSERT */ 1487 1488 // Force freeze slow path. 1489 push_cont_fastpath(); 1490 1491 // Make VM call. In case of preemption set last_pc to the one we want to resume to. 1492 // Note: call_VM_base will use resume_pc label to set last_Java_pc. 1493 call_VM_base(noreg, noreg, noreg, &resume_pc, entry_point, number_of_arguments, false /*check_exceptions*/); 1494 1495 pop_cont_fastpath(); 1496 1497 #ifdef ASSERT 1498 { 1499 Label L; 1500 decrementw(Address(rthread, JavaThread::interp_at_preemptable_vmcall_cnt_offset())); 1501 ldrw(rscratch1, Address(rthread, JavaThread::interp_at_preemptable_vmcall_cnt_offset())); 1502 cmpw(rscratch1, 0); 1503 br(Assembler::GE, L); 1504 stop("call_VM_preemptable_helper: should be >= 0"); 1505 bind(L); 1506 } 1507 #endif /* ASSERT */ 1508 1509 // Check if preempted. 1510 ldr(rscratch1, Address(rthread, JavaThread::preempt_alternate_return_offset())); 1511 cbz(rscratch1, not_preempted); 1512 str(zr, Address(rthread, JavaThread::preempt_alternate_return_offset())); 1513 br(rscratch1); 1514 1515 // In case of preemption, this is where we will resume once we finally acquire the monitor. 1516 bind(resume_pc); 1517 restore_after_resume(false /* is_native */); 1518 1519 bind(not_preempted); 1520 if (check_exceptions) { 1521 // check for pending exceptions 1522 ldr(rscratch1, Address(rthread, in_bytes(Thread::pending_exception_offset()))); 1523 Label ok; 1524 cbz(rscratch1, ok); 1525 lea(rscratch1, RuntimeAddress(StubRoutines::forward_exception_entry())); 1526 br(rscratch1); 1527 bind(ok); 1528 } 1529 1530 // get oop result if there is one and reset the value in the thread 1531 if (oop_result->is_valid()) { 1532 get_vm_result_oop(oop_result, rthread); 1533 } 1534 } 1535 1536 static void pass_arg1(MacroAssembler* masm, Register arg) { 1537 if (c_rarg1 != arg ) { 1538 masm->mov(c_rarg1, arg); 1539 } 1540 } 1541 1542 static void pass_arg2(MacroAssembler* masm, Register arg) { 1543 if (c_rarg2 != arg ) { 1544 masm->mov(c_rarg2, arg); 1545 } 1546 } 1547 1548 void InterpreterMacroAssembler::call_VM_preemptable(Register oop_result, 1549 address entry_point, 1550 Register arg_1, 1551 bool check_exceptions) { 1552 pass_arg1(this, arg_1); 1553 call_VM_preemptable_helper(oop_result, entry_point, 1, check_exceptions); 1554 } 1555 1556 void InterpreterMacroAssembler::call_VM_preemptable(Register oop_result, 1557 address entry_point, 1558 Register arg_1, 1559 Register arg_2, 1560 bool check_exceptions) { 1561 LP64_ONLY(assert_different_registers(arg_1, c_rarg2)); 1562 pass_arg2(this, arg_2); 1563 pass_arg1(this, arg_1); 1564 call_VM_preemptable_helper(oop_result, entry_point, 2, check_exceptions); 1565 } 1566 1567 void InterpreterMacroAssembler::restore_after_resume(bool is_native) { 1568 lea(rscratch1, ExternalAddress(Interpreter::cont_resume_interpreter_adapter())); 1569 blr(rscratch1); 1570 if (is_native) { 1571 // On resume we need to set up stack as expected 1572 push(dtos); 1573 push(ltos); 1574 } 1575 } 1576 1577 void InterpreterMacroAssembler::profile_obj_type(Register obj, const Address& mdo_addr) { 1578 assert_different_registers(obj, rscratch1, mdo_addr.base(), mdo_addr.index()); 1579 Label update, next, none; 1580 1581 verify_oop(obj); 1582 1583 cbnz(obj, update); 1584 orptr(mdo_addr, TypeEntries::null_seen); 1585 b(next); 1586 1587 bind(update); 1588 load_klass(obj, obj, rscratch1); 1589 1590 ldr(rscratch1, mdo_addr); 1591 eor(obj, obj, rscratch1); 1592 tst(obj, TypeEntries::type_klass_mask); 1593 br(Assembler::EQ, next); // klass seen before, nothing to 1594 // do. The unknown bit may have been 1595 // set already but no need to check. 1596 1597 tbnz(obj, exact_log2(TypeEntries::type_unknown), next); 1598 // already unknown. Nothing to do anymore. 1599 1600 cbz(rscratch1, none); 1601 cmp(rscratch1, (u1)TypeEntries::null_seen); 1602 br(Assembler::EQ, none); 1603 // There is a chance that the checks above 1604 // fail if another thread has just set the 1605 // profiling to this obj's klass 1606 eor(obj, obj, rscratch1); // get back original value before XOR 1607 ldr(rscratch1, mdo_addr); 1608 eor(obj, obj, rscratch1); 1609 tst(obj, TypeEntries::type_klass_mask); 1610 br(Assembler::EQ, next); 1611 1612 // different than before. Cannot keep accurate profile. 1613 orptr(mdo_addr, TypeEntries::type_unknown); 1614 b(next); 1615 1616 bind(none); 1617 // first time here. Set profile type. 1618 str(obj, mdo_addr); 1619 #ifdef ASSERT 1620 andr(obj, obj, TypeEntries::type_mask); 1621 verify_klass_ptr(obj); 1622 #endif 1623 1624 bind(next); 1625 } 1626 1627 void InterpreterMacroAssembler::profile_arguments_type(Register mdp, Register callee, Register tmp, bool is_virtual) { 1628 if (!ProfileInterpreter) { 1629 return; 1630 } 1631 1632 if (MethodData::profile_arguments() || MethodData::profile_return()) { 1633 Label profile_continue; 1634 1635 test_method_data_pointer(mdp, profile_continue); 1636 1637 int off_to_start = is_virtual ? in_bytes(VirtualCallData::virtual_call_data_size()) : in_bytes(CounterData::counter_data_size()); 1638 1639 ldrb(rscratch1, Address(mdp, in_bytes(DataLayout::tag_offset()) - off_to_start)); 1640 cmp(rscratch1, u1(is_virtual ? DataLayout::virtual_call_type_data_tag : DataLayout::call_type_data_tag)); 1641 br(Assembler::NE, profile_continue); 1642 1643 if (MethodData::profile_arguments()) { 1644 Label done; 1645 int off_to_args = in_bytes(TypeEntriesAtCall::args_data_offset()); 1646 1647 for (int i = 0; i < TypeProfileArgsLimit; i++) { 1648 if (i > 0 || MethodData::profile_return()) { 1649 // If return value type is profiled we may have no argument to profile 1650 ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset()))); 1651 sub(tmp, tmp, i*TypeStackSlotEntries::per_arg_count()); 1652 cmp(tmp, (u1)TypeStackSlotEntries::per_arg_count()); 1653 add(rscratch1, mdp, off_to_args); 1654 br(Assembler::LT, done); 1655 } 1656 ldr(tmp, Address(callee, Method::const_offset())); 1657 load_unsigned_short(tmp, Address(tmp, ConstMethod::size_of_parameters_offset())); 1658 // stack offset o (zero based) from the start of the argument 1659 // list, for n arguments translates into offset n - o - 1 from 1660 // the end of the argument list 1661 ldr(rscratch1, Address(mdp, in_bytes(TypeEntriesAtCall::stack_slot_offset(i)))); 1662 sub(tmp, tmp, rscratch1); 1663 sub(tmp, tmp, 1); 1664 Address arg_addr = argument_address(tmp); 1665 ldr(tmp, arg_addr); 1666 1667 Address mdo_arg_addr(mdp, in_bytes(TypeEntriesAtCall::argument_type_offset(i))); 1668 profile_obj_type(tmp, mdo_arg_addr); 1669 1670 int to_add = in_bytes(TypeStackSlotEntries::per_arg_size()); 1671 off_to_args += to_add; 1672 } 1673 1674 if (MethodData::profile_return()) { 1675 ldr(tmp, Address(mdp, in_bytes(TypeEntriesAtCall::cell_count_offset()))); 1676 sub(tmp, tmp, TypeProfileArgsLimit*TypeStackSlotEntries::per_arg_count()); 1677 } 1678 1679 add(rscratch1, mdp, off_to_args); 1680 bind(done); 1681 mov(mdp, rscratch1); 1682 1683 if (MethodData::profile_return()) { 1684 // We're right after the type profile for the last 1685 // argument. tmp is the number of cells left in the 1686 // CallTypeData/VirtualCallTypeData to reach its end. Non null 1687 // if there's a return to profile. 1688 assert(SingleTypeEntry::static_cell_count() < TypeStackSlotEntries::per_arg_count(), "can't move past ret type"); 1689 add(mdp, mdp, tmp, LSL, exact_log2(DataLayout::cell_size)); 1690 } 1691 str(mdp, Address(rfp, frame::interpreter_frame_mdp_offset * wordSize)); 1692 } else { 1693 assert(MethodData::profile_return(), "either profile call args or call ret"); 1694 update_mdp_by_constant(mdp, in_bytes(TypeEntriesAtCall::return_only_size())); 1695 } 1696 1697 // mdp points right after the end of the 1698 // CallTypeData/VirtualCallTypeData, right after the cells for the 1699 // return value type if there's one 1700 1701 bind(profile_continue); 1702 } 1703 } 1704 1705 void InterpreterMacroAssembler::profile_return_type(Register mdp, Register ret, Register tmp) { 1706 assert_different_registers(mdp, ret, tmp, rbcp); 1707 if (ProfileInterpreter && MethodData::profile_return()) { 1708 Label profile_continue, done; 1709 1710 test_method_data_pointer(mdp, profile_continue); 1711 1712 if (MethodData::profile_return_jsr292_only()) { 1713 assert(Method::intrinsic_id_size_in_bytes() == 2, "assuming Method::_intrinsic_id is u2"); 1714 1715 // If we don't profile all invoke bytecodes we must make sure 1716 // it's a bytecode we indeed profile. We can't go back to the 1717 // beginning of the ProfileData we intend to update to check its 1718 // type because we're right after it and we don't known its 1719 // length 1720 Label do_profile; 1721 ldrb(rscratch1, Address(rbcp, 0)); 1722 cmp(rscratch1, (u1)Bytecodes::_invokedynamic); 1723 br(Assembler::EQ, do_profile); 1724 cmp(rscratch1, (u1)Bytecodes::_invokehandle); 1725 br(Assembler::EQ, do_profile); 1726 get_method(tmp); 1727 ldrh(rscratch1, Address(tmp, Method::intrinsic_id_offset())); 1728 subs(zr, rscratch1, static_cast<int>(vmIntrinsics::_compiledLambdaForm)); 1729 br(Assembler::NE, profile_continue); 1730 1731 bind(do_profile); 1732 } 1733 1734 Address mdo_ret_addr(mdp, -in_bytes(SingleTypeEntry::size())); 1735 mov(tmp, ret); 1736 profile_obj_type(tmp, mdo_ret_addr); 1737 1738 bind(profile_continue); 1739 } 1740 } 1741 1742 void InterpreterMacroAssembler::profile_parameters_type(Register mdp, Register tmp1, Register tmp2) { 1743 assert_different_registers(rscratch1, rscratch2, mdp, tmp1, tmp2); 1744 if (ProfileInterpreter && MethodData::profile_parameters()) { 1745 Label profile_continue, done; 1746 1747 test_method_data_pointer(mdp, profile_continue); 1748 1749 // Load the offset of the area within the MDO used for 1750 // parameters. If it's negative we're not profiling any parameters 1751 ldrw(tmp1, Address(mdp, in_bytes(MethodData::parameters_type_data_di_offset()) - in_bytes(MethodData::data_offset()))); 1752 tbnz(tmp1, 31, profile_continue); // i.e. sign bit set 1753 1754 // Compute a pointer to the area for parameters from the offset 1755 // and move the pointer to the slot for the last 1756 // parameters. Collect profiling from last parameter down. 1757 // mdo start + parameters offset + array length - 1 1758 add(mdp, mdp, tmp1); 1759 ldr(tmp1, Address(mdp, ArrayData::array_len_offset())); 1760 sub(tmp1, tmp1, TypeStackSlotEntries::per_arg_count()); 1761 1762 Label loop; 1763 bind(loop); 1764 1765 int off_base = in_bytes(ParametersTypeData::stack_slot_offset(0)); 1766 int type_base = in_bytes(ParametersTypeData::type_offset(0)); 1767 int per_arg_scale = exact_log2(DataLayout::cell_size); 1768 add(rscratch1, mdp, off_base); 1769 add(rscratch2, mdp, type_base); 1770 1771 Address arg_off(rscratch1, tmp1, Address::lsl(per_arg_scale)); 1772 Address arg_type(rscratch2, tmp1, Address::lsl(per_arg_scale)); 1773 1774 // load offset on the stack from the slot for this parameter 1775 ldr(tmp2, arg_off); 1776 neg(tmp2, tmp2); 1777 // read the parameter from the local area 1778 ldr(tmp2, Address(rlocals, tmp2, Address::lsl(Interpreter::logStackElementSize))); 1779 1780 // profile the parameter 1781 profile_obj_type(tmp2, arg_type); 1782 1783 // go to next parameter 1784 subs(tmp1, tmp1, TypeStackSlotEntries::per_arg_count()); 1785 br(Assembler::GE, loop); 1786 1787 bind(profile_continue); 1788 } 1789 } 1790 1791 void InterpreterMacroAssembler::load_resolved_indy_entry(Register cache, Register index) { 1792 // Get index out of bytecode pointer, get_cache_entry_pointer_at_bcp 1793 get_cache_index_at_bcp(index, 1, sizeof(u4)); 1794 // Get address of invokedynamic array 1795 ldr(cache, Address(rcpool, in_bytes(ConstantPoolCache::invokedynamic_entries_offset()))); 1796 // Scale the index to be the entry index * sizeof(ResolvedIndyEntry) 1797 lsl(index, index, log2i_exact(sizeof(ResolvedIndyEntry))); 1798 add(cache, cache, Array<ResolvedIndyEntry>::base_offset_in_bytes()); 1799 lea(cache, Address(cache, index)); 1800 } 1801 1802 void InterpreterMacroAssembler::load_field_entry(Register cache, Register index, int bcp_offset) { 1803 // Get index out of bytecode pointer 1804 get_cache_index_at_bcp(index, bcp_offset, sizeof(u2)); 1805 // Take shortcut if the size is a power of 2 1806 if (is_power_of_2(sizeof(ResolvedFieldEntry))) { 1807 lsl(index, index, log2i_exact(sizeof(ResolvedFieldEntry))); // Scale index by power of 2 1808 } else { 1809 mov(cache, sizeof(ResolvedFieldEntry)); 1810 mul(index, index, cache); // Scale the index to be the entry index * sizeof(ResolvedFieldEntry) 1811 } 1812 // Get address of field entries array 1813 ldr(cache, Address(rcpool, ConstantPoolCache::field_entries_offset())); 1814 add(cache, cache, Array<ResolvedFieldEntry>::base_offset_in_bytes()); 1815 lea(cache, Address(cache, index)); 1816 // Prevents stale data from being read after the bytecode is patched to the fast bytecode 1817 membar(MacroAssembler::LoadLoad); 1818 } 1819 1820 void InterpreterMacroAssembler::load_method_entry(Register cache, Register index, int bcp_offset) { 1821 // Get index out of bytecode pointer 1822 get_cache_index_at_bcp(index, bcp_offset, sizeof(u2)); 1823 mov(cache, sizeof(ResolvedMethodEntry)); 1824 mul(index, index, cache); // Scale the index to be the entry index * sizeof(ResolvedMethodEntry) 1825 1826 // Get address of field entries array 1827 ldr(cache, Address(rcpool, ConstantPoolCache::method_entries_offset())); 1828 add(cache, cache, Array<ResolvedMethodEntry>::base_offset_in_bytes()); 1829 lea(cache, Address(cache, index)); 1830 } 1831 1832 #ifdef ASSERT 1833 void InterpreterMacroAssembler::verify_field_offset(Register reg) { 1834 // Verify the field offset is not in the header, implicitly checks for 0 1835 Label L; 1836 subs(zr, reg, oopDesc::base_offset_in_bytes()); 1837 br(Assembler::GE, L); 1838 stop("bad field offset"); 1839 bind(L); 1840 } 1841 #endif --- EOF ---